Are you trying to install a Netgear WiFi extender in your home? Don’t know how to configure a Netgear extender? Then You’ve reached the correct place. Step-by-step instructions for Netgear WiFi extender setup are provided here. The most significant thing to consider is the requirements for a simple Netgear WiFi extender setup. The following are the requirements for Netgear range extender setup:

1. Locate your Netgear range extender in the same room as your router.
2. Provide a proper power supply to your extender.
3. The other thing is to have a functional WiFi network.
4. You must grab a smart device having a web browser in it.
5.  It is necessary to have more than one web browser installed on your computer or laptop. It is possible that you will be unable to log into the Netgear wifi extender setup page due to a web browser issue. In such conditions, you can use a different browser.

The above were the requirements to set up a Netgear wifi range extender. Let’s go ahead with the procedure to configure your extender. Mainly, there are two methods to finalize the Netgear wifi extender setup, which are as follows:

• Web browser setup (Manual setup).
• Wireless protected setup (WPS).

In this blog we will learn about both methods for Netgear wifi extender .

Netgear wifi extender setup: Manual method 

Manual setup is the first method to install your Netgear range extender. This method is also known as the web browser setup. Here are the steps to setup your extender manually:

1. Turn on your Netgear extender.
2. Connect your repeater to the existing wifi.
3. Open a web browser like chrome,mozilla firefox e.t.c.
4. Visit www.mywifiext.net website or Netgear extender default IP address. 
5. Now you are on mywifiext login page.
6. Create a login account.
7. Choose the network that you want to extend.
8. Click on Finish to complete the setup process.
9. Now you can place the extender at your desired location having dead spots.

In this way you can configure your Netgear extender via manual setup or you say, web browser setup. In the next step we will talk about the wireless protected setup (WPS).

Netgear extender Setup: WPS Method 

Let’s get more familiar with another way to setup your Netgear wifi range extender,which is also called the most fast and easy method to install your extender. Wireless protected setup (WPS) does not require a password, username, or SSID. You can simply configure your wifi booster by pressing a button. Let’s see how it is done.

To setup your extender via WPS method go through these steps:

1. Plugin your netgear extender and turn it on.
2. Make sure that your booster is connected to the existing router.
3. When the power LED on your repeater turns stable green.
4. Press the WPS button on your netgear extender.
5. After a minute, press the same WPS button on the existing router as well.
6. After two minutes, if the light status on the repeater is solid green.
7. That means you have performed the WPS setup successfully.

That’s how you can complete the Netgear wifi extender setup within two minutes only via the WPS method.

How do I update the firmware using mywifiext?

To maximize product performance, security, and usefulness after mywifiext login, keep your wireless range extender firmware up to date. The simplest technique for upgrading extender firmware is to perform the following steps:

• Using an Ethernet cable, connect your WiFi range extender to your network.
• Connect a power outlet to the WiFi extender.
• Allow a few minutes for the WiFi extender’s LED to solidify.
• Now open any web browser on your desktop.
• For more information, visit mywifiext.net or mywifiext.local.
• You will be sent to the Netgear extender configuration window.
• Enter the default extender login credentials.
• Select the ‘Login’ option.
• From the drop-down option, choose ‘Administration.’
• Choose ‘Firmware Update’ from the menu.
• Select the ‘Yes’ option if updated firmware is available.

The latest firmware will be downloaded and installed on your WiFi range extender right away. If you run into any difficulties, please reach us by calling our toll free number.

How to change the username and password for Netgear extender?

The procedure to change the username and password using mywifiext is quite simple. In this blog, we will discuss the detailed steps to complete this procedure, which are as follows:

• Open your preferred web browser.
• Visit www.mywifiext page.
• Type your username and password.
• Hit the login button.
• Open the password settings.
• On the screen, new username and password options will display.
• Enter the username and password that you want to set.
• At last, click on save option.