For your Netgear extender to operate correctly after a successful Netgear wifi extender setup, you must regularly update the software. But, you are in serious trouble if you are unable to do so or you are having problems with the Netgear extender firmware update failure, don’t worry; we have technical experts on hand to help you figure out the issue. So, read through this post’s steps to find out how to solve the Netgear extender firmware update failure problem in a matter of minutes.
What are the reasons behind the Netgear extender firmware update failure?
You may not have updated the firmware on your WiFi range extender from Netgear for a number of reasons. Those are all:
- There’s a problem with your internet connection.
- The connection between your Netgear router and extension is unstable.
- There’s a problem on the end of your Internet service provider (ISP).
- Your wireless device’s signals are being disrupted by electronic devices.
- It’s possible that technical difficulties will prevent you from correctly updating the firmware on your Netgear extender.
- You did not update the firmware on your device in accordance with the correct instructions.
Now that you know the causes behind your device’s inability to update its firmware, follow the steps listed below to fix the problem.
Now let’s fix the Netgear extender firmware update failure issue.
The following troubleshooting techniques will surely help you fix the Netgear extender firmware update failure issue:
Turn on the Netgear Extender again.
Before continuing, reboot your Netgear WiFi range extender. Restarting a gadget is sometimes all it takes to fix technical problems.
Thus, use the instructions listed below to restart your wifi device:
- Unplug any WiFi-capable devices connected to the network of your extender.
- Turn off and unplug your extender from the wall outlet, and allow some time to do so.
- Reconnect your Netgear extender to the socket.
- Turn it on after the wait is over, and wait for the solid green light on power LED.
Try now to get into the Netgear WiFi extender login page and update the firmware on your equipment. Can you really do that? Proceed with reading if not.
Check the Status of Your Internet Connection
As previously said, you may not be able to update the Netgear extender firmware if you have a bad internet connection. To fix the problem, get in touch with your Internet service provider (ISP).
Verify the connection between your router and extender again if it’s not his fault. Is it safe? If not, the reason for this is probably that your devices are wirelessly linked. To fix the problem, it is advised that you connect them with an Ethernet wire.
Reduce the Interference of WiFi
Keep your Netgear WiFi range extender away from reflecting surfaces, metal objects, electronic devices, and transmitting appliances. Otherwise, avoid placing your extension near cordless phones, washing machines, treadmills, refrigerators, microwave ovens, mirrors, fish tanks, aluminum studs, and other comparable appliances.
Perform the Correct Procedures
When trying to upgrade the firmware on their Netgear WiFi range extenders, many users make the mistake of following the wrong instructions. It’s highly likely that you carried out the same action.
Therefore, to successfully upgrade the Netgear extender firmware, carefully follow these instructions:
- After turning on your computer, open an internet browser such as Internet Explorer or Google Chrome.
- In the address box of your web browser, type mywifiext.net.
- You’ll be taken to the login page for Netgear_ext.
- After completing the relevant fields with the default admin data, click Log In.
- On the Netgear Genie dashboard, select Settings > Maintenance > Firmware Update.
This will allow you to update the firmware on your device to the most recent version. Although the tips stated above should help you resolve the Netgear extender firmware update failure issue, if they don’t, don’t wait any longer and contact our knowledgeable technical specialists.
Continue reading for more information about:
How to fix Netgear extender orange light issue?
Why is my iPhone not connecting to the Netgear extender network?
